23. Main Control Valve Body Assembly Removal

Main Control Valve Body Assembly Removal






Important: Do not misplace the following components when removing the main control valve body assembly (250):
- Oil cooler check ball (228)
- Oil cooler return spring (227)
- Torque converter check valve (225)
- Torque converter check valve return spring (226)
- Lubrication spool valve (245)

1. Remove the 9 main control valve body assembly mount bolts (221), (222), (223) and (224).





2. Remove the torque converter check valve (225).
3. Remove the torque converter check valve spring (226).
4. Remove the oil cooler check ball return spring (227).
5. Remove the oil cooler check ball (228)
6. Remove the 4th clutch apply fluid passage tube (214).
7. Remove the lubrication spool valve (245).





8. Carefully raise the main control valve body assembly (250) from the torque converter housing assembly (150).
9. Remove the fluid pump driven gear shaft (233) from the torque converter housing assembly (150).
10. Remove the fluid pump driven gear (232) from the torque converter housing assembly (150),
11. Remove the fluid pump drive gear (234) from the torque converter housing assembly (150)





12. Remove the 2 main control valve body spacer plate locating pins (243) and the main control valve body spacer plate (244) from the torque converter housing (150).