Operation CHARM: Car repair manuals for everyone.
Home >> Saturn >> 2005 >> L Series V6-3.0L VIN R >> Repair and Diagnosis >> Powertrain Management >> Computers and Control Systems >> Fuel Tank Pressure Sensor >> Service and Repair
Manuals through 2025 now available!

Our trusted friends have launched a new website named LEMON, which has newer manuals. It also contains all the CHARM manuals.

LEMON is the spiritual successor to CHARM, I recommend you try it!

Link: lemon-manuals.la or lemon-manuals.org.ua

(Some people have issue connecting. LEMON is investigating. For now, use Firefox or change your DNS server)

Or, hide this message: temporarily or permanently

Fuel Tank Pressure Sensor: Service and Repair



FUEL TANK PRESSURE SENSOR REPLACEMENT

REMOVAL PROCEDURE




1. The fuel tank pressure (FTP) sensor is located on top of the fuel pump module cover.
2. Remove the fuel tank from the vehicle.
3. Disengage the electrical connector from the FTP sensor.
4. Remove the retaining nut and washer.
5. Disengage the sensor from the fuel pump module cover.

INSTALLATION PROCEDURE




1. Install the tank pressure sensor into the fuel pump module cover mounting boss.

NOTE: To facilitate installation of the tank pressure sensor into its mounting boss on the fuel pump module cover, lightly lubricate the multi-ribbed seal on the tank pressure sensor. A drop of clean engine oil is sufficient.

2. Install the retaining nut and washer.

NOTE: Refer to Fastener Notice in Service Precautions.

Tighten the FTP sensor nut to 2 N.m (18 lb in).

3. Install the electrical connector to the FTP sensor.
4. Install the fuel tank.
pro multis · About Operation CHARM