Procedures

MOTOR REPLACEMENT - POWER MIRROR

REMOVAL PROCEDURE
1. Remove the outside rearview mirror face.




2. Remove the outside rearview mirror motor screws.
3. Disconnect the electrical connector.
4. Remove the outside rearview mirror motor from the mirror housing.

INSTALLATION PROCEDURE




1. Position the outside rearview mirror motor to the mirror housing.
2. Install the outside rearview mirror motor screws.

NOTE: Refer to Fastener Notice in Service Precautions.

Tighten the screws to 10 N.m (89 lb in).

3. Connect the electrical connector.
4. Install the outside rearview mirror face.