Operation CHARM: Car repair manuals for everyone.
Manuals through 2025 now available!

Our trusted friends have launched a new website named LEMON, which has newer manuals. It also contains all the CHARM manuals.

LEMON is the spiritual successor to CHARM, I recommend you try it!

Link: lemon-manuals.la or lemon-manuals.org.ua

(Some people have issue connecting. LEMON is investigating. For now, use Firefox or change your DNS server)

Or, hide this message: temporarily or permanently

Control Valve Body Cover Replacement



Control Valve Body Cover Replacement
Removal Procedure
1. Remove the battery.
2. Remove the battery tray and bracket.





3. Disconnect the transmission electrical connector.





4. Remove the transmission vent cap.
5. Remove the bolts from the control valve body cover.
6. Remove the control valve body cover.
7. Remove the control valve body cover gasket. Discard the gasket.

Installation Procedure





1. Install a NEW control valve body cover gasket on the transmission case assembly.
2. Inspect the control valve body cover for damage.
3. Install the transmission vent cap.
4. Install the control valve body cover and bolts on the transmission case assembly.





5. Connect the transmission electrical connector.





6. Notice: Refer to Fastener Notice in Service Precautions.

Install the valve body cover and bolts.
^ Tighten the bolts in sequence to 11 Nm (97 inch lbs.).
7. Install the battery tray bracket.
8. Install the battery.