Operation CHARM: Car repair manuals for everyone.
Home >> Saturn >> 2007 >> Aura V6-3.5L >> Repair and Diagnosis >> Powertrain Management >> Computers and Control Systems >> Sensors and Switches - Computers and Control Systems >> Camshaft Position Sensor >> Service and Repair
Manuals through 2025 now available!

Our trusted friends have launched a new website named LEMON, which has newer manuals. It also contains all the CHARM manuals.

LEMON is the spiritual successor to CHARM, I recommend you try it!

Link: lemon-manuals.la or lemon-manuals.org.ua

(Some people have issue connecting. LEMON is investigating. For now, use Firefox or change your DNS server)

Or, hide this message: temporarily or permanently

Camshaft Position Sensor: Service and Repair



Camshaft Position Sensor Replacement

Removal Procedure




1. Remove the intake manifold cover. if required.
2. Remove the power steering pump, if required.
3. Disconnect the fuel injector wiring harness electrical connector from the camshaft position (CMP) sensor.




4. Remove the CMP sensor bolt.
5. Remove the CMP sensor.
6. Inspect the sensor O-ring for wear, cracks, or leakage if the sensor is not being replaced.

Installation Procedure




1. Replace the O-ring seal if damaged, lubricate the NEW O-ring with clean engine oil.
2. Install the CMP sensor.

Notice: Refer to Fastener Notice.

3. Install the CMP sensor bolt.

Tighten the bolt to 10 N.m (89 lb in).




4. Connect the fuel injector wiring harness electrical connector to the CMP sensor.
5. Install the power steering pump, if required.
6. Install the intake manifold cover. if required.
pro multis · About Operation CHARM