C0848
DTC C0848
Circuit Description
The power steering control module (PSCM) receives a class 2 power moding message from the body control module (BCM) to determine the position of the ignition switch. After a power mode OFF message is received, the PSCM monitors the ignition 1 voltage circuit to detect if a short to voltage fault exists.
DTC Descriptor
This diagnostic procedure supports the following DTC:
DTC C0848 Device Ignition 1 Circuit High
Conditions for Running the DTC
* The ignition is OFF.
* The class 2 power mode message indicates OFF.
Conditions for Setting the DTC
* The PSCM ignition 1 voltage circuit is shorted to voltage.
* DTCs U1300 and U1301 are not set.
Action Taken When the DTC Sets
* DTC C0848 is stored in memory.
* The instrument panel cluster (IPC) message center displays the PWR STR warning message.
Conditions for Clearing the MIL/DTC
* A current DTC will clear on the next consecutive malfunction free ignition cycle.
* A history DTC will clear after 100 consecutive malfunction free ignition cycles.
* Using a scan tool.
