Operation CHARM: Car repair manuals for everyone.
Home >> Saturn >> 2007 >> ION L4-2.2L >> Repair and Diagnosis >> Engine, Cooling and Exhaust >> Exhaust System >> Heat Shield >> Service and Repair >> Wheel Drive Shaft Heat Shield Replacement
Manuals through 2025 now available!

Our trusted friends have launched a new website named LEMON, which has newer manuals. It also contains all the CHARM manuals.

LEMON is the spiritual successor to CHARM, I recommend you try it!

Link: lemon-manuals.la or lemon-manuals.org.ua

(Some people have issue connecting. LEMON is investigating. For now, use Firefox or change your DNS server)

Or, hide this message: temporarily or permanently

Wheel Drive Shaft Heat Shield Replacement



Wheel Drive Shaft Heat Shield Replacement

Removal Procedure




1. Raise and support the vehicle.
2. Remove the wheel drive shaft heat shield bolt at the transaxle mount bracket.
3. Remove the drive shaft heat shield bolt at the engine block.
4. Remove the wheel drive shaft heat shield.

Installation Procedure




1. Install the wheel drive shaft heat shield into position on the vehicle.

Notice: Refer to Fastener Notice.

2. Install the wheel drive shaft heat shield bolt to the engine block.

Tighten the bolt to 30 N.m (22 lb ft).

3. Install the wheel drive shaft heat shield bolt to the transaxle mount bracket.

Tighten the bolt to 10 N.m (89 lb in).

4. Lower the vehicle.

pro multis · About Operation CHARM