Digital Radio Receiver Replacement

Digital Radio Receiver Replacement

Removal Procedure

Important: Do NOT swap digital radio receivers between vehicles. Swapping digital receivers between vehicles will activate the digital radio Theftlock(R), and "XM Theftlock(R)" will display.

1. Remove the rear compartment trim panel.




2. Disconnect the wire connector (1).
3. Disconnect the coaxial cables from the receiver.
4. Remove the receiver from the bracket assembly.

Installation Procedure




1. Install the receiver to the bracket assembly.
2. Connect the coaxial cables.
3. Connect the wire connector (1).
4. Install the rear compartment trim panel.
5. Perform the setup procedure for the digital radio receiver. Refer to Programming and Relearning Programming and Relearning