Operation CHARM: Car repair manuals for everyone.
Manuals through 2025 now available!

Our trusted friends have launched a new website named LEMON, which has newer manuals. It also contains all the CHARM manuals.

LEMON is the spiritual successor to CHARM, I recommend you try it!

Link: lemon-manuals.la or lemon-manuals.org.ua

(Some people have issue connecting. LEMON is investigating. For now, use Firefox or change your DNS server)

Or, hide this message: temporarily or permanently

Front Door Weatherstrip: Service and Repair



Weatherstrip Replacement - Front Door Opening

Removal Procedure




1. Remove the front carpet retainer.
2. Remove the door opening weatherstrip (1) by pulling the weatherstrip from the pinch-weld flange.
3. Remove any adhesive from the pinch-weld flange using 3M(TM) adhesive remover P/N 8984, or equivalent.

Installation Procedure

1. Apply weatherstrip adhesive GM P/N 12345096 or equivalent to the weatherstrip.




2. Install the door opening weatherstrip by aligning the joint of the weatherstrip along the rearward portion of the door opening. Once aligned, begin installing the weatherstrip at the top rear corner of the opening (1), and pressing the weatherstrip until fully seated.




3. Finish installing the door opening weatherstrip by pressing the weatherstrip into place in a counterclockwise direction around the door opening.
4. Install the front carpet retainer.