Headlamp Housing Panel Replacement (Sedan)

Headlamp Housing Panel Replacement (Sedan)

Removal Procedure

1. Remove the headlamp assembly.




2. Remove the plastic retainers that connect the upper grille to the headlamp panel.
3. Remove the ambient air temperature sensor.
4. Remove the retaining bolts from the headlamp mounting panel.
5. Rotate the headlamp mounting panel through the headlamp opening. Remove the headlamp mounting panel from the vehicle.

Installation Procedure




1. Position the headlamp mounting panel to the vehicle.

Notice: Refer to Fastener Notice.

2. Install the retaining bolts to the headlamp mounting panel.

* Tighten the upper tie bar bolts to 10 N.m (89 lb in).
* Tighten the fender bolts to 8 N.m (71 lb in).

3. Install the ambient air temperature sensor.
4. Install the plastic retainers that connect the upper grille to the headlamp panel.
5. Install the headlamp assembly.