Operation CHARM: Car repair manuals for everyone.

Steering Wheel Replacement



Steering Wheel Replacement

Tools Required

* J 42578 Steering Wheel Puller Legs
* J 1859-A Steering Wheel Puller

Removal Procedure

1. Disable the SIR system.
2. Remove the inflatable restraint steering wheel module. Inflatable Restraint Steering Wheel Module Replacement




3. If equipped with cruise control, disconnect the cruise control switch connector from the steering column.
4. Remove the steering wheel nut.
5. Remove the steering wheel. It may be necessary to use the J 42578 and J 1859-A or equivalent to remove the steering wheel.

Installation Procedure




1. Align the steering wheel to the steering column and install the steering wheel.

Notice: Refer to Fastener Notice.

2. Install the steering wheel nut.

Tighten the steering wheel nut to 41 N.m (30 lb ft).

3. If equipped with cruise control, connect the cruise control switch connector.
4. Install the inflatable restraint steering wheel module.
5. Enable the SIR system.