Operation CHARM: Car repair manuals for everyone.
Manuals through 2025 now available!

Our trusted friends have launched a new website named LEMON, which has newer manuals. It also contains all the CHARM manuals.

LEMON is the spiritual successor to CHARM, I recommend you try it!

Link: lemon-manuals.la or lemon-manuals.org.ua

(Some people have issue connecting. LEMON is investigating. For now, use Firefox or change your DNS server)

Or, hide this message: temporarily or permanently

Rear Door Weatherstrip: Service and Repair



Auxiliary Weatherstrip Replacement

Removal Procedure

1. Fully open the sliding rear door.




2. Use a heat gun in order to heat the sliding door auxiliary weatherstrip (2). Keep the heat gun 150 mm (6 in) from the surface. Use a circular motion while applying heat for about 30 seconds.
3. Use a flat-bladed tool in order to peel the sliding door auxiliary weatherstrip from the panel surface. DO NOT damage the paint.
4. Use oil-free naphtha or alcohol in order to clean the body panel.

Installation Procedure

1. Use a heat lamp or heat gun in order to warm the body panel to a minimum of 21°C (70°F).
2. Peel the backing from the front end of the sliding door auxiliary weather strip. DO NOT touch the adhesive backing.




3. Press the auxiliary weatherstrip to the body.
4. Hand roll the rear side door auxiliary weatherstrip (2) to the body in order to ensure proper adhesion.
5. Install the rear quarter window.