Operation CHARM: Car repair manuals for everyone.
Home >> Saturn >> 2007 >> RELAY AWD V6-3.9L >> Repair and Diagnosis >> Brakes and Traction Control >> Antilock Brakes / Traction Control Systems >> Wheel Speed Sensor >> Service and Repair >> Front Wheel Speed Sensor Replacement
Manuals through 2025 now available!

Our trusted friends have launched a new website named LEMON, which has newer manuals. It also contains all the CHARM manuals.

LEMON is the spiritual successor to CHARM, I recommend you try it!

Link: lemon-manuals.la or lemon-manuals.org.ua

(Some people have issue connecting. LEMON is investigating. For now, use Firefox or change your DNS server)

Or, hide this message: temporarily or permanently

Front Wheel Speed Sensor Replacement



Front Wheel Speed Sensor Replacement

Removal Procedure

Important: The front wheel speed sensors and rings are integral with the hub and bearing assemblies.

If a speed sensor or a ring needs replacement, replace the entire hub and bearing assembly. Do not service the harness pigtail individually because the harness pigtail is part of the sensor.

Remove the hub and bearing assembly.

Installation Procedure

1. Install the hub and bearing assembly to the vehicle.
2. Lower the vehicle.
3. Turn the ignition switch to the RUN position with the engine OFF.
4. Perform diagnostic system check. Go to Diagnostic System Check - Vehicle. Initial Inspection and Diagnostic Overview

pro multis · About Operation CHARM