Operation CHARM: Car repair manuals for everyone.
Home >> Saturn >> 2007 >> RELAY AWD V6-3.9L >> Repair and Diagnosis >> Brakes and Traction Control >> Disc Brake System >> Service and Repair >> Rear Disc Brake Hardware Replacement
Manuals through 2025 now available!

Our trusted friends have launched a new website named LEMON, which has newer manuals. It also contains all the CHARM manuals.

LEMON is the spiritual successor to CHARM, I recommend you try it!

Link: lemon-manuals.la or lemon-manuals.org.ua

(Some people have issue connecting. LEMON is investigating. For now, use Firefox or change your DNS server)

Or, hide this message: temporarily or permanently

Rear Disc Brake Hardware Replacement



Rear Disc Brake Hardware Replacement

Removal Procedure

Caution: Refer to Brake Dust Caution.




1. Remove the brake caliper from the mounting bracket and support the brake caliper (2) with heavy mechanic's wire (1), or equivalent. It is not necessary to disconnect the hydraulic brake flexible hose from the caliper.




2. Remove the brake pads (9, 10) from the brake caliper bracket (12).
3. Remove the brake pad retainers (11) from the brake caliper bracket (12).
4. Remove the brake caliper bracket (12).
5. Mount the brake caliper bracket (12) in a vise.

Installation Procedure

1. Clean all parts in clean, denatured alcohol.
2. Dry with low pressure, non-lubricated, filtered air.
3. Inspect the brake caliper bracket for cracks. If cracked, replace bracket.
4. Lubricate the brake caliper pin bolt sleeves with high temperature silicone lubricant.
5. Install the brake caliper bracket.




6. Install the brake pad retainers (11) to the bracket caliper bracket (12).
7. Install the brake pads (9, 10) to the bracket caliper bracket (12).
8. Install the brake caliper (15) to the brake caliper bracket (12).

pro multis · About Operation CHARM