Operation CHARM: Car repair manuals for everyone.
Home >> Saturn >> 2007 >> RELAY AWD V6-3.9L >> Repair and Diagnosis >> Powertrain Management >> Computers and Control Systems >> Accelerator Pedal Position Sensor >> Service and Repair
Manuals through 2025 now available!

Our trusted friends have launched a new website named LEMON, which has newer manuals. It also contains all the CHARM manuals.

LEMON is the spiritual successor to CHARM, I recommend you try it!

Link: lemon-manuals.la or lemon-manuals.org.ua

(Some people have issue connecting. LEMON is investigating. For now, use Firefox or change your DNS server)

Or, hide this message: temporarily or permanently

Accelerator Pedal Position Sensor: Service and Repair



Accelerator Pedal Position Sensor Replacement

Removal Procedure




1. Remove the insulator panel.
2. Remove the connector position assurance (CPA) retainer.
3. Disconnect the instrument panel (I/P) harness electrical connector (1) from the accelerator pedal.




4. Remove the accelerator pedal bolts.
5. Remove the accelerator pedal (2).

Installation Procedure




1. Install the accelerator pedal (2).

Notice: Refer to Fastener Notice.

2. Install the accelerator pedal bolts (1).

Tighten the bolts to 10 N.m (89 lb in).




3. Connect the I/P harness electrical connector (1) to the accelerator pedal.
4. Install the CPA retainer.
5. Install the insulator panel.
6. Verify the operation of the accelerator pedal.

pro multis · About Operation CHARM