Operation CHARM: Car repair manuals for everyone.
Manuals through 2025 now available!

Our trusted friends have launched a new website named LEMON, which has newer manuals. It also contains all the CHARM manuals.

LEMON is the spiritual successor to CHARM, I recommend you try it!

Link: lemon-manuals.la or lemon-manuals.org.ua

(Some people have issue connecting. LEMON is investigating. For now, use Firefox or change your DNS server)

Or, hide this message: temporarily or permanently

Starter Motor: Service and Repair



Starter Motor Replacement (3.5L (L66))

Removal Procedure

Important: Record all pre-set radio stations.




1. Turn the ignition OFF.
2. Disconnect the negative battery cable.
3. Remove the B+ battery cable nut at starter.
4. Remove the S-terminal connector.
5. Remove the lower starter assembly to transmission bolt and oxygen sensor connector bracket.
6. Remove the upper starter assembly to transmission bolt.
7. Remove the starter.

Installation Procedure




1. Install the starter to the transmission.

Notice: Refer to Fastener Notice.

2. Install the starter mounting bolts.

Tighten the starter-to-transmission bolts to 44 N.m (33 lb ft).

3. Install the B+ cable and nut.

Tighten the B+ cable-to-starter nut to 10 N.m (89 lb in).

4. Install the S-terminal wire.
5. Connect the negative battery cable to the battery.

Tighten the battery terminal bolt to 17 N.m (13 lb ft).

6. Reprogram the radio stations.