Operation CHARM: Car repair manuals for everyone.
Home >> Saturn >> 2007 >> VUE FWD L4-2.2L >> Repair and Diagnosis >> Brakes and Traction Control >> Antilock Brakes / Traction Control Systems >> Hydraulic Control Assembly - Antilock Brakes >> Service and Repair >> Brake Pressure Modulator Valve Bracket Replacement
Manuals through 2025 now available!

Our trusted friends have launched a new website named LEMON, which has newer manuals. It also contains all the CHARM manuals.

LEMON is the spiritual successor to CHARM, I recommend you try it!

Link: lemon-manuals.la or lemon-manuals.org.ua

(Some people have issue connecting. LEMON is investigating. For now, use Firefox or change your DNS server)

Or, hide this message: temporarily or permanently

Brake Pressure Modulator Valve Bracket Replacement



Brake Pressure Modulator Valve Bracket Replacement

Removal Procedure




1. Remove the transmission control module (TCM), if equipped, from the mounting bracket and position aside.




2. Turn the ignition switch to the OFF position.
3. Disconnect the electronic brake control module (EBCM) electrical connector.




4. Loosen the 2 insulator nuts on the brake pressure modulator valve (BPMV) assembly.
5. Carefully lift the brake modulator assembly just enough to clear the bracket, then support the assembly.




6. Remove the brake pressure modulator assembly bracket mounting bolts.
7. Remove the bracket from the vehicle.

Installation Procedure




1. Install the BPMV assembly bracket to the vehicle.

Notice: Refer to Fastener Notice.

2. Install the brake pressure modulator assembly bracket mounting bolts and nut.

Tighten the bolts and nut to 10 N.m (89 lb in).




3. Install the brake modulator assembly to the bracket.
4. Tighten the 2 brake pressure modulator assembly insulator nuts.

Tighten the nuts to 10 N.m (89 lb in).




5. Connect the EBCM electrical connector.




6. Reposition the TCM, if equipped, to the mounting bracket.

pro multis · About Operation CHARM