Operation CHARM: Car repair manuals for everyone.
Manuals through 2025 now available!

Our trusted friends have launched a new website named LEMON, which has newer manuals. It also contains all the CHARM manuals.

LEMON is the spiritual successor to CHARM, I recommend you try it!

Link: lemon-manuals.la or lemon-manuals.org.ua

(Some people have issue connecting. LEMON is investigating. For now, use Firefox or change your DNS server)

Or, hide this message: temporarily or permanently

Passenger Compartment Air Filter Housing Replacement



Passenger Compartment Air Filter Housing Replacement

Removal Procedure




1. Remove the push pins from the air filter access panel.
2. Lift the air filter access panel and disconnect the washer nozzle hose from the washer nozzle.
3. Remove the air filter access panel.




4. Remove the filter housing nuts from the body.
5. Remove the filter housing from the body.

Installation Procedure




1. Inspect the foam seal. If the seal is damaged, replace the seal using Kent Industries adhesive back foam tape P/N 46485 or equivalent.
2. Install the filter housing to the body.

Notice: Refer to Fastener Notice.

Important: New seal nuts must be used when installing passenger compartment air filter housing to prevent leaks.

3. Install the new seal nuts to the filter housing.

Tighten the nuts to 9 N.m (80 lb in).




4. Connect the washer nozzle hose to the washer nozzle.
5. Install the air filter access panel.
6. Install the push pins to the air filter access panel.