Control Valve Body Assembly Removal

Control Valve Body Assembly Removal





Important: Do not misplace the following components when removing the control valve body assembly (250):

* Oil cooler check ball (228)

* Oil cooler return spring (227)

* Torque converter check valve (225)

* Torque converter check valve return spring (226)

* Lubrication control valve (245)

Remove the 10 control valve body bolts.
* 2 control valve body bolts (221)
* 2 control valve body bolts (222)
* 3 control valve body bolts (223)
* 3 control valve body bolts (224)




2. Remove the torque converter check valve (225).
3. Remove the torque converter check valve spring (226).
4. Remove the oil cooler check ball return spring (227).
5. Remove the oil cooler check ball (228)
6. Remove the 4th clutch apply fluid pipe (214).
7. Remove the lubrication control valve (245)




8. Lifting straight up, remove the control valve body assembly (250) from the torque converter housing assembly (150).
9. Remove the fluid pump driven gear pin (233).
10. Remove the fluid pump driven gear (232).
11. Remove the fluid pump drive gear (234).




12. Remove the 2 control valve body spacer plate locating pins (243).
13. Remove the control valve body spacer plate (244).