Instrument Panel Center Air Outlet Replacement
Instrument Panel Center Air Outlet Replacement
Removal Procedure
1. Remove the heating/air conditioning control. Refer to Heater and Air Conditioning Control Replacement (Service and Repair) .
2. Remove the accessory panel from the instrument panel (I/P).
1. Remove the 2 bolts (1).
2. Release the panel.
3. Disconnect the wiring harness plug (2).
4. Release and disconnect wiring harness plug.
3. Remove the center air outlet (1).
Release the 6 clips (2).
Installation Procedure
1. Install the center air outlet.
Install the 6 clips.
2. Install the accessory panel onto the I/P.
Notice: Refer to Fastener Notice (Fastener Notice) .
3. Connect the wiring harness plug.
Clip in the panel.
Tighten the 2 bolts to 5 N.m (44 lb in).
4. Install the heating/air conditioning control. Refer to Heater and Air Conditioning Control Replacement (Service and Repair) .