Operation CHARM: Car repair manuals for everyone.
Home >> Saturn >> 2008 >> Astra L4-1.8L >> Repair and Diagnosis >> Powertrain Management >> Computers and Control Systems >> Transmission Position Sensor/Switch >> Service and Repair >> Automatic Transmission Range Selector Lever Replacement
Manuals through 2025 now available!

Our trusted friends have launched a new website named LEMON, which has newer manuals. It also contains all the CHARM manuals.

LEMON is the spiritual successor to CHARM, I recommend you try it!

Link: lemon-manuals.la or lemon-manuals.org.ua

(Some people have issue connecting. LEMON is investigating. For now, use Firefox or change your DNS server)

Or, hide this message: temporarily or permanently

Automatic Transmission Range Selector Lever Replacement



Automatic Transmission Range Selector Lever Replacement

Removal Procedure

1. Remove the front floor console. Refer to Front Floor Console Replacement (Service and Repair) .




2. Remove the range selector cable (2) from the selector lever.

* Remove the retaining clamp (1).
* Disconnect the selector lever cable from the bracket.





3. Remove the range selector lever assembly.

* Disconnect the wiring harness plug (1).
* Remove the 4 bolts (2).
* Remove the selector lever assembly.




Installation Procedure






Notice: Refer to Fastener Notice (Fastener Notice) .

1. Install the selector lever assembly.

* Insert the range selector lever assembly.

Tighten the 4 bolts to 5 N.m (44 lb in).

* Connect the wiring harness plug (1).





2. Install the selector cable (2) to the selector lever.

* Install the selector lever cable to the bracket.
* Install the retaining clamp.

3. Install the front floor console. Refer to Front Floor Console Replacement (Service and Repair) .
4. For programming procedures, refer to Control Module References (Programming and Relearning) .


pro multis · About Operation CHARM