Operation CHARM: Car repair manuals for everyone.
Home >> Saturn >> 2008 >> Astra L4-1.8L >> Repair and Diagnosis >> Powertrain Management >> Fuel Delivery and Air Induction >> Fuel Pressure Sensor/Switch >> Service and Repair
Manuals through 2025 now available!

Our trusted friends have launched a new website named LEMON, which has newer manuals. It also contains all the CHARM manuals.

LEMON is the spiritual successor to CHARM, I recommend you try it!

Link: lemon-manuals.la or lemon-manuals.org.ua

(Some people have issue connecting. LEMON is investigating. For now, use Firefox or change your DNS server)

Or, hide this message: temporarily or permanently

Fuel Pressure Sensor/Switch: Service and Repair



Fuel Pressure Sensor Replacement

Removal Procedure

1. Loosen the nuts on the right rear wheel.
2. Raise the vehicle halfway.
3. Remove the right rear wheel.




4. Remove the right rear wheel housing inner paneling.

* Remove the 2 nuts (1)
* Remove the 2 bolts (2)

5. Remove the pressure sensor (atmospheric pressure) (2)

1. Disconnect the wiring harness from the pressure sensor (atmospheric pressure) (1)
2. Remove the cable ties (4)
3. Disconnect the wiring harness plug
4. Remove the bolt (3)




Installation Procedure

1. Install the pressure sensor (atmospheric pressure).

1. Connect wiring harness of pressure sensor (atmospheric pressure)
2. Connect the wiring harness plug
3. Attach the cable ties


Notice: Refer to Fastener Notice (Fastener Notice) .

2. Tighten the right rear wheel housing bolt.

Tighten the bolt to 4 N.m (35 lb in).

3. Install the right rear wheel housing inner paneling .

* Tighten the 2 nuts to 2.5 N.m (22 lb in).
* Tighten the 2 bolts to 2.5 N.m (22 lb in).


4. Mount the right rear wheel.
5. Lower the vehicle halfway.

Tighten the right rear wheel to 110 N.m (81 lb ft).



pro multis · About Operation CHARM