Operation CHARM: Car repair manuals for everyone.
Manuals through 2025 now available!

Our trusted friends have launched a new website named LEMON, which has newer manuals. It also contains all the CHARM manuals.

LEMON is the spiritual successor to CHARM, I recommend you try it!

Link: lemon-manuals.la or lemon-manuals.org.ua

(Some people have issue connecting. LEMON is investigating. For now, use Firefox or change your DNS server)

Or, hide this message: temporarily or permanently

Headlamp Alignment Control Module: Service and Repair



Headlamp Leveling Module Replacement

Removal Procedure

Caution: Refer to Battery Disconnect Caution (Battery Disconnect Caution) .

Important: When replacing the headlamp leveling module, before removing the control unit, carry out a "Reset" using TECH 2. For reprogramming procedures, refer to Control Module References (Programming and Relearning) .


1. Disconnect the battery.
2. Remove the drivers knee bolster. Refer to Driver Knee Bolster Replacement (Service and Repair) .




3. Remove the headlamp leveling module.

* Remove the bolt (1).
* Remove the headlamp leveling module.
* Disconnect the wiring harness plug (2).




Installation Procedure


Notice: Refer to Fastener Notice (Fastener Notice) .

1. Position the headlamp leveling module.

* Connect the wiring harness plug.
* Install the headlamp leveling module.

- Tighten the bolt to 2.5 N.m (22 lb in).
- Tighten the nut to 2.5 N.m (22 lb in).



2. Install the drivers knee bolster. Refer to Driver Knee Bolster Replacement (Service and Repair) .
3. Connect the battery.
4. For reprogramming procedures, refer to Control Module References (Programming and Relearning) .