Operation CHARM: Car repair manuals for everyone.
Manuals through 2025 now available!

Our trusted friends have launched a new website named LEMON, which has newer manuals. It also contains all the CHARM manuals.

LEMON is the spiritual successor to CHARM, I recommend you try it!

Link: lemon-manuals.la or lemon-manuals.org.ua

(Some people have issue connecting. LEMON is investigating. For now, use Firefox or change your DNS server)

Or, hide this message: temporarily or permanently

Air Bag Control Module: Service and Repair



Inflatable Restraint Sensing and Diagnostic Module Replacement

Removal Procedure

Caution: Refer to Battery Disconnect Caution (Battery Disconnect Caution) .
1. Disconnect the battery.
2. Wait 1 minute for the airbag to deactivate.
3. Remove the front floor console. Refer to Front Floor Console Replacement (Service and Repair) .




4. Remove the airbag control unit.
Remove the 3 nuts (1) and remove the control unit.
5. Loosen the airbag wiring harness.
Release the 2 wiring harness plugs and disconnect.



Installation Procedure

1. Fasten the airbag wiring harness.
Connect and latch the wiring harness plug.

Notice: Refer to Fastener Notice (Fastener Notice) .

2. Install the airbag control unit.

* Connect 2 wiring harness plugs.


Tighten the 3 nuts to 10 N.m (89 lb in).


3. Install the front floor console. Refer to Front Floor Console Replacement (Service and Repair)
4. Connect the battery.

Important: When replacing the control unit, after installing the control unit, program with a scan tool.


5. For programming procedures, refer to Control Module References (Programming and Relearning) .