Operation CHARM: Car repair manuals for everyone.
Home >> Saturn >> 2008 >> Astra L4-1.8L >> Repair and Diagnosis >> Testing and Inspection >> Programming and Relearning >> Tire Pressure Indicator Receiver Programming and Setup
Manuals through 2025 now available!

Our trusted friends have launched a new website named LEMON, which has newer manuals. It also contains all the CHARM manuals.

LEMON is the spiritual successor to CHARM, I recommend you try it!

Link: lemon-manuals.la or lemon-manuals.org.ua

(Some people have issue connecting. LEMON is investigating. For now, use Firefox or change your DNS server)

Or, hide this message: temporarily or permanently

Tire Pressure Indicator Receiver Programming and Setup



Tire Pressure Indicator Receiver Programming and Setup

Tire Pressure Indicator Receiver Replacement/Reprogramming

When the tire pressure indicator receiver is replaced, the following procedures must be performed:

1. With a scan tool, perform the Reset ECU before removing the tire pressure indicator receiver.
2. After replacement, with a scan tool, perform the Program ECU and follow the screen prompts.
3. Upon programming completion, test drive the vehicle above 32 km/h (20 mph) until the scan tool Learn Status data parameter is displayed as Completed.


The tire pressure monitor system should now be functioning properly.

pro multis · About Operation CHARM