Operation CHARM: Car repair manuals for everyone.
Home >> Saturn >> 2008 >> Astra L4-1.8L >> Repair and Diagnosis >> Transmission and Drivetrain >> Automatic Transmission/Transaxle >> Service and Repair >> Overhaul >> Assemble, Disassemble, and Installation >> Control Valve Body Assembly Installation
Manuals through 2025 now available!

Our trusted friends have launched a new website named LEMON, which has newer manuals. It also contains all the CHARM manuals.

LEMON is the spiritual successor to CHARM, I recommend you try it!

Link: lemon-manuals.la or lemon-manuals.org.ua

(Some people have issue connecting. LEMON is investigating. For now, use Firefox or change your DNS server)

Or, hide this message: temporarily or permanently

Control Valve Body Assembly Installation



Control Valve Body Assembly Installation





1. Install the NEW 2 transmission case fluid passage seals (84).




2. While holding the transmission control valve body assembly (39), connect the manual valve link (336) to the manual shift shaft detent assembly (710) and install the transmission control valve body assembly (39).





Notice: Refer to Fastener Notice (Fastener Notice) .

3. Install the 8 control valve body bolts (281, 282, 283, 284).

Tighten the bolts to 10 N.m (89 lb in).





4. Install a NEW control valve body fluid passage cover gasket and the control valve body fluid passage cover.
5. Install the 2 control valve body fluid passage bolts (33, 34).

Tighten the bolts to 10 N.m (89 lb in).





6. Clamp the wiring harness assembly (78).




7. Connect the 5 solenoid wire connectors.
8. Clamp the transmission fluid temperature sensor (32).


pro multis · About Operation CHARM