Intake Manifold

Lower Intake Manifold Bolts
Install the new lower intake manifold bolts if applicable, in sequence.

first pass 7 N.m (62 lb in) on the .
final pass bolts (1, 2, 3, 4) in sequence to 13 N.m (115 lb)
final pass bolts (5, 6, 7, 8) in sequence to 25 N.m (18 lb ft)

Notice: Failure to tighten vertical bolts before the diagonal bolts may cause an oil leak.




Upper Intake Manifold Bolts (1, 2) and stud (3) 25 N.m (18 lb ft)




Throttle Body Bolts (9) and nuts (10) 10 N.m (89 lb in)