Operation CHARM: Car repair manuals for everyone.
Home >> Saturn >> 2008 >> VUE AWD V6-3.5L >> Repair and Diagnosis >> Powertrain Management >> Ignition System >> Ignition Coil >> Service and Repair
Manuals through 2025 now available!

Our trusted friends have launched a new website named LEMON, which has newer manuals. It also contains all the CHARM manuals.

LEMON is the spiritual successor to CHARM, I recommend you try it!

Link: lemon-manuals.la or lemon-manuals.org.ua

(Some people have issue connecting. LEMON is investigating. For now, use Firefox or change your DNS server)

Or, hide this message: temporarily or permanently

Ignition Coil: Service and Repair



Ignition Coil Replacement

Removal Procedure

1. Remove the air cleaner outlet duct, if required. Refer to Air Cleaner Outlet Duct Replacement (Air Cleaner Outlet Duct Replacement) .




2. Disconnect the manifold absolute pressure (MAP) sensor electrical connector (1).
3. Disconnect the ignition coil electrical connector (6).




4. Disconnect the left side spark plug wires from the ignition coil.




5. Disconnect the right side spark plug wires from the ignition coil.




6. Remove the ignition coil bracket bolts/nuts.
7. Remove the ignition coil assembly.
8. Remove the ignition coil bracket studs, if necessary.



Installation Procedure






Notice: Refer to Fastener Notice (Fastener Notice) .

1. Install the ignition coil bracket studs, if necessary.

Tighten the studs to 25 N.m (15 lb ft).

2. Install the ignition coil assembly.
3. Install the ignition coil bracket bolts/nuts.

Tighten the bolts/nuts to 25 N.m (15 lb ft).





4. Connect the right side spark plug wires to the ignition coil.




5. Connect the left side spark plug wires to the ignition coil.




6. Connect the ignition coil electrical connector (6).
7. Connect the MAP sensor electrical connector (1).
8. Install the air cleaner outlet duct, if required. Refer to Air Cleaner Outlet Duct Replacement (Air Cleaner Outlet Duct Replacement) .


pro multis · About Operation CHARM