Operation CHARM: Car repair manuals for everyone.
Home >> Saturn >> 2009 >> VUE FWD V6-3.6L Hybrid >> Repair and Diagnosis >> Hybrid Drive Systems >> Service and Repair >> Removal and Replacement >> Drive Motor Generator Control Module Coolant Pump Hose Replacement
Manuals through 2025 now available!

Our trusted friends have launched a new website named LEMON, which has newer manuals. It also contains all the CHARM manuals.

LEMON is the spiritual successor to CHARM, I recommend you try it!

Link: lemon-manuals.la or lemon-manuals.org.ua

(Some people have issue connecting. LEMON is investigating. For now, use Firefox or change your DNS server)

Or, hide this message: temporarily or permanently

Drive Motor Generator Control Module Coolant Pump Hose Replacement




Drive Motor Generator Control Module Coolant Pump Hose Replacement

Special Tools

J 38185 - Hose Clamp Pliers

Removal Procedure

1. Drain the generator control module cooling system. Refer to Generator Control Module Cooling System Draining and Filling (Generator Control Module Cooling System Draining and Filling)
2. Remove the generator control module coolant pump hose - pump to radiator inlet. Refer to Generator Control Module Coolant Pump Hose Replacement - Pump to Radiator Inlet (Generator Control Module Coolant Pump Hose Replacement (Pump to Radiator))
3. Remove the generator control module coolant pump hose. Refer to Generator Control Module Coolant Pump Hose Replacement (Generator Control Module Coolant Pump Hose Replacement)
4. Disconnect the electrical connectors from the drive motor generator control module coolant pumps.




5. Remove the drive motor generator control module coolant pump bolts (1).
6. Remove the drive motor generator control module coolant pump hose assembly (2) from the vehicle.




7. Remove the drive motor generator control module coolant pump hose clamps (1) using J 38185 - Hose Clamp Pliers.
8. Remove the drive motor generator control module coolant pump hose (2).

Installation Procedure




1. Install the drive motor generator control module coolant pump hose (2).
2. Install the drive motor generator control module coolant pump hose clamps (1) using J 38185 - Hose Clamp Pliers.




3. Install the drive motor generator control module coolant pump hose assembly (2) from the vehicle.

Caution: Refer to Fastener Caution (Fastener Caution).

4. Install the drive motor generator control module coolant pump bolts (1) and tighten to7.5 Nm (66 lb in).
5. Connect the electrical connectors to the drive motor generator control module coolant pumps.
6. Install the generator control module coolant pump hose. Refer to Generator Control Module Coolant Pump Hose Replacement (Generator Control Module Coolant Pump Hose Replacement)
7. Install the generator control module coolant pump hose - pump to radiator inlet. Refer to Generator Control Module Coolant Pump Hose Replacement - Pump to Radiator Inlet (Generator Control Module Coolant Pump Hose Replacement (Pump to Radiator))
8. Fill the generator control module cooling system. Refer to Generator Control Module Cooling System Draining and Filling (Generator Control Module Cooling System Draining and Filling)

pro multis · About Operation CHARM