Connecting Rod, Engine

Connecting rod thrust clearance
Standard 0.16 to 0.36 mm (0.0063 to 0.0142 in.)
Maximum 0.36 mm (0.0142 in.)
Connecting rod oil clearance
Standard 0.016 to 0.040 mm (0.0006 to 0.0016 in.)
Maximum 0.06 mm (0.0024 in.)
Connecting rod out-of alignment
Maximum 0.05 mm (0.0020 in.) per 100 mm (3.94 in.)
Connecting rod twist
Maximum 0.05 mm (0.0020 in.) per 100 mm (3.94 in.)
Connecting rod bolt diameter
Standard 6.6 to 6.7 mm (0.260 to 0.264 in.)
Maximum 6.4 mm (0.252 in.)
Connecting rod cap x Connecting rod
1st 15 Nm (153 kgf-cm, 11 ft. lbs.)
2nd Turn 90° Turn 90° Turn 90°