Operation CHARM: Car repair manuals for everyone.
Home >> Scion >> 2005 >> tC L4-2.4L (2AZ-FE) >> Repair and Diagnosis >> Powertrain Management >> Computers and Control Systems >> Sensors and Switches - Computers and Control Systems >> Air Flow Meter/Sensor >> Service and Repair
Manuals through 2025 now available!

Our trusted friends have launched a new website named LEMON, which has newer manuals. It also contains all the CHARM manuals.

LEMON is the spiritual successor to CHARM, I recommend you try it!

Link: lemon-manuals.la or lemon-manuals.org.ua

(Some people have issue connecting. LEMON is investigating. For now, use Firefox or change your DNS server)

Or, hide this message: temporarily or permanently

Air Flow Meter/Sensor: Service and Repair

MASS AIR FLOW METER

REPLACEMENT

NOTE: When disconnecting the battery terminal, initialize the following system after the terminal is reconnected.
- Power window control system
- Sliding roof system

1. DISCONNECT BATTERY NEGATIVE TERMINAL




2. REMOVE MASS AIR FLOW METER
a. Disconnect the mass air flow meter connector.
b. Remove the 2 screws, then remove the mass air flow meter.




3. INSTALL MASS AIR FLOW METER
a. Install the mass air flow meter with the 2 screws.

NOTE: Make sure that the O-ring is not cracked or jammed when installing.

b. Connect the mass air flow meter connector.

4. CONNECT BATTERY NEGATIVE TERMINAL

Torque: 5.4 N.m (55 kgf.cm, 48 in.lbf)
pro multis · About Operation CHARM