With Generic Scan Tool

DTC CLEAR

When using the OBD II scan tool or hand-held tester:

Clearing the DTCs.

1. Connect the OBD II scan tool or hand-held tester to the DLC3.
2. Turn the ignition switch to the ON position and turn the OBD II scan tool or the hand-held tester main switch on.
3. When you use hand-held tester:
Select the item "DIAGNOSIS/ENHANCED OBD II/ DTC INFO/CLEAR CODES [YES] button".

HINT: When operating the OBD II scan tool (complying with SAE J1978) or hand held tester to erase the codes, the DTCs and freeze frame data will be erased. (See the OBD II scan tool's instruction book for operating instructions.)