Operation CHARM: Car repair manuals for everyone.
Home >> Scion >> 2005 >> tC L4-2.4L (2AZ-FE) >> Repair and Diagnosis >> Transmission and Drivetrain >> Automatic Transmission/Transaxle >> Transmission Speed Sensor >> Service and Repair
Manuals through 2025 now available!

Our trusted friends have launched a new website named LEMON, which has newer manuals. It also contains all the CHARM manuals.

LEMON is the spiritual successor to CHARM, I recommend you try it!

Link: lemon-manuals.la or lemon-manuals.org.ua

(Some people have issue connecting. LEMON is investigating. For now, use Firefox or change your DNS server)

Or, hide this message: temporarily or permanently

Transmission Speed Sensor: Service and Repair









SPEED SENSOR (ATM)
REPLACEMENT





NOTICE: When disconnecting the battery terminal, initialize the system(s) shown after the terminal is reconnected.

1. REMOVE BATTERY
2. REMOVE BATTERY CARRIER
3. REMOVE AIR CLEANER ASSEMBLY





4. REMOVE SPEED SENSOR (NT SENSOR)
a. Disconnect the speed sensor connector.
b. Remove the bolt and speed sensor.





5. REMOVE SPEED SENSOR (NC SENSOR)
a. Disconnect the speed sensor connector.
b. Remove the bolt and speed sensor.





6. INSTALL SPEED SENSOR (NC SENSOR)
a. Coat the O-ring of the speed sensor with ATF.
b. Install the speed sensor with the bolt.
Torque: 8.8 Nm (90 kgf-cm, 78 inch lbs.)
c. Connect the speed sensor connector.





7. INSTALL SPEED SENSOR (NT SENSOR)
a. Coat the O-ring of the speed sensor with ATF.
b. Install the speed sensor with the bolt.
Torque: 11 Nm (115 kgf-cm, 8 ft. lbs.)
c. Connect the speed sensor connector.
8. INSTALL AIR CLEANER ASSEMBLY
Torque: 5.0 Nm (51 kgf-cm, 44 inch lbs.)
9. INSTALL BATTERY CARRIER
Torque: 13 Nm (130 kgf-cm, 10 ft. lbs.)
10. INSTALL BATTERY


pro multis · About Operation CHARM