Multiple Junction Connector

There are two types of wire harness for the instrument panel on xA.




Type A : The wire harness that uses the color coded wire.
Type B : The wire harness that uses the same colored wire. (Not color coded)




This means that there is a case where the wire harness used for even the same section may have different colored wire depending on the models.

Therefore, the wire colors are also mentioned as given.

In case of using the same colored wires, each terminal number is printed on the wire as shown in the illustration in order to distinguish each wiring.

Be sure to connect the terminal to the same place as indicated by the terminal number printed on the wire after disconnecting the terminal from the connector.