Crankshaft Main Bearing

Crankshaft
Maximum circle runout 0.03 mm (0.0012 inch)
Main journal
Standard diameter 45.988 to 46.000 mm (1.8106 to 1.8110 inch)
Maximum taper & distortion 0.02 mm (0.0008 inch)

Crankshaft Main Bearing Size Codes

Reference:

Standard cylinder block diameter:

Standard crankshaft journal diameter:

Crankshaft Main Bearing Cap Bolts

Diameter
Standard 7.3 to 7.5 mm (0.287 to 0.295 inch)
Minimum 7.2 mm (0.283 inch)

First pass 22 Nm (224 kgf-cm, 16 ft. lbs.) in several steps
Final pass Tighten 90°