Operation CHARM: Car repair manuals for everyone.
Home >> Scion >> 2007 >> tC L4-2.4L (2AZ-FE) >> Repair and Diagnosis >> Heating and Air Conditioning >> Control Assembly >> Service and Repair >> Removal and Replacement
Manuals through 2025 now available!

Our trusted friends have launched a new website named LEMON, which has newer manuals. It also contains all the CHARM manuals.

LEMON is the spiritual successor to CHARM, I recommend you try it!

Link: lemon-manuals.la or lemon-manuals.org.ua

(Some people have issue connecting. LEMON is investigating. For now, use Firefox or change your DNS server)

Or, hide this message: temporarily or permanently

Removal and Replacement

Heater Control Assembly:




HEATER CONTROL ASSEMBLY

REMOVAL

1. DISCONNECT CABLE FROM NEGATIVE BATTERY TERMINAL

CAUTION: Wait at least 90 seconds after disconnecting the cable from the negative (-) battery terminal to prevent airbag and seat belt pretensioner activation.

2. REMOVE SHIFT LEVER KNOB SUB-ASSEMBLY (for Manual Transaxle)
3. REMOVE CONSOLE PANEL UPPER FRONT
4. REMOVE INSTRUMENT CLUSTER FINISH PANEL ASSEMBLY




a. Detach the 9 claws.

NOTE: If the heater control is removed with the cover open, it may be broken. Be sure the cover is closed when removing it.

b. Disconnect the connector, then remove the heater control.

INSTALLATION

1. INSTALL INSTRUMENT CLUSTER FINISH PANEL ASSEMBLY




a. Connect the connector.
b. Attach the 9 claws to install the instrument cluster finish panel.

2. INSTALL CONSOLE PANEL UPPER FRONT
3. INSTALL SHIFT LEVER KNOB SUB-ASSEMBLY (for Manual Transaxle)
4. CONNECT CABLE TO NEGATIVE BATTERY TERMINAL
5. PERFORM INITIALIZATION
a. Perform initialization.

NOTE: Certain systems need to be initialized after disconnecting and reconnecting the cable from the negative (-) battery terminal.
pro multis · About Operation CHARM