Camshaft Bearing

Camshaft Bearing Cap
Camshaft





Using several steps, uniformly tighten the 10 bearing cap bolts in the sequence shown in the illustration.
Torque:
for No. 1 bearing cap 29.5 N*m (301 kgf*cm, 22 ft.*lbf)
for No. 3 bearing cap 9.0 N*m (92 kgf*cm, 80 in.*lbf)
NO. 2 CAMSHAFT





Examine the front marks and numbers and check that the order is as shown in the illustration. Then install the bearing caps onto the cylinder head.
Apply a light coat of engine oil to the threads and under the heads of the bearing cap bolts.





Using several steps, uniformly tighten the 10 bearing cap bolts in the sequence shown in the illustration.
Torque:
for No. 1 bearing cap 29.5 N*m (301 kgf*cm, 22 ft.*lbf)
for No. 3 bearing cap 9.0 N*m (92 kgf*cm, 80 in.*lbf)