Operation CHARM: Car repair manuals for everyone.
Home >> Scion >> 2008 >> tC L4-2.4L (2AZ-FE) >> Repair and Diagnosis >> Brakes and Traction Control >> Disc Brake System >> Service and Repair >> Front Brake >> Disassembly
Manuals through 2025 now available!

Our trusted friends have launched a new website named LEMON, which has newer manuals. It also contains all the CHARM manuals.

LEMON is the spiritual successor to CHARM, I recommend you try it!

Link: lemon-manuals.la or lemon-manuals.org.ua

(Some people have issue connecting. LEMON is investigating. For now, use Firefox or change your DNS server)

Or, hide this message: temporarily or permanently

Disassembly








BRAKE: FRONT BRAKE: DISASSEMBLY

DISASSEMBLY
HINT:
- Use the same procedures for the LH side and RH side.
- The procedures listed below are for the LH side.





1. REMOVE CYLINDER BOOT
(a) Using a screwdriver, pry out the set ring and cylinder boot.
NOTE: Be careful not to damage the brake piston and cylinder.





2. REMOVE FRONT DISC BRAKE PISTON
(a) Place a piece of cloth or equivalent between the piston and brake cylinder.
(b) Use compressed air to remove the piston from the brake cylinder.
CAUTION: Do not place your finger in front of the piston when using compressed air.
NOTE: Be careful not to spatter the brake fluid.

3. REMOVE PISTON SEAL
(a) Using a screwdriver, pry out the seal from the brake cylinder.
NOTE: Be careful not to damage the inner cylinder and cylinder groove.

4. REMOVE FRONT DISC BRAKE BLEEDER PLUG
pro multis · About Operation CHARM