Operation CHARM: Car repair manuals for everyone.
Home >> Scion >> 2008 >> xB L4-2.4L (2AZ-FE) >> Repair and Diagnosis >> Brakes and Traction Control >> Disc Brake System >> Service and Repair >> Front Brake >> Reassembly
Manuals through 2025 now available!

Our trusted friends have launched a new website named LEMON, which has newer manuals. It also contains all the CHARM manuals.

LEMON is the spiritual successor to CHARM, I recommend you try it!

Link: lemon-manuals.la or lemon-manuals.org.ua

(Some people have issue connecting. LEMON is investigating. For now, use Firefox or change your DNS server)

Or, hide this message: temporarily or permanently

Reassembly








BRAKE: FRONT BRAKE: REASSEMBLY

REASSEMBLY

1. TEMPORARILY TIGHTEN FRONT DISC BRAKE BLEEDER PLUG
2. INSTALL FRONT DISC BRAKE BLEEDER PLUG CAP
3. INSTALL PISTON SEAL
(a) Apply lithium soap base glycol grease to a new piston seal.
(b) Install the piston seal to the disc brake cylinder.
NOTE: Securely install the piston seal into the groove of the disc brake cylinder.





4. INSTALL FRONT DISC BRAKE PISTON
(a) Apply lithium soap base glycol grease to the piston and a new cylinder boot.
(b) Install the cylinder boot to the piston.
NOTE: Securely install the cylinder boot into the groove of the piston.

(c) Install the piston into the disc brake cylinder.
NOTE: Do not forcibly install the piston into the disc brake cylinder.





5. INSTALL CYLINDER BOOT
(a) Install the cylinder boot into the disc brake cylinder.
NOTE: Securely install the cylinder boot into the groove of the disc brake cylinder.

(b) Using a screwdriver, install a new set ring.
NOTICE:
- Securely install the set ring to groove of the cylinder boot.
- Do not damage the cylinder boot.
pro multis · About Operation CHARM