Operation CHARM: Car repair manuals for everyone.
Home >> Scion >> 2008 >> xD L4-1.8L (2ZR-FE) >> Repair and Diagnosis >> Powertrain Management >> Ignition System >> Spark Plug >> Service and Repair >> Installation
Manuals through 2025 now available!

Our trusted friends have launched a new website named LEMON, which has newer manuals. It also contains all the CHARM manuals.

LEMON is the spiritual successor to CHARM, I recommend you try it!

Link: lemon-manuals.la or lemon-manuals.org.ua

(Some people have issue connecting. LEMON is investigating. For now, use Firefox or change your DNS server)

Or, hide this message: temporarily or permanently

Installation








2ZR-FE IGNITION: IGNITION COIL AND SPARK PLUG: INSTALLATION

INSTALLATION

1. INSTALL SPARK PLUG
(a) Install the 4 spark plugs.
Torque: 20 Nm (204 kgf-cm, 15 ft-lbf)
2. INSTALL IGNITION COIL ASSEMBLY






(a) Install the 4 ignition coils with the 4 bolts.
Torque: 10 Nm (102 kgf-cm, 7 ft-lbf)
NOTE: Do not damage the rubber ignition coil tips when installing the ignition coils.

(b) Connect the 4 ignition coil connectors.






(c) Connect the camshaft timing oil control valve connector.
3. INSTALL NO. 2 CYLINDER HEAD COVER






(a) Engage the 4 fittings shown and install the No. 2 cylinder head cover by applying pressure to it.
HINT: Make sure that the oil filler cap and the engine oil level dipstick are correctly installed before installing the No. 2 cylinder head cover.
pro multis · About Operation CHARM