Disassembly

AIR CONDITIONING: COMPRESSOR AND MAGNETIC CLUTCH: DISASSEMBLY

COMPRESSOR AND MAGNETIC CLUTCH: DISASSEMBLY

1. REMOVE MAGNET CLUTCH ASSEMBLY





(a) Using SST, hold the magnet clutch hub.
SST: 09985-00270
(b) Remove the bolt, magnet clutch hub and magnet clutch washer.
HINT: There is no set number of magnet clutch washers since they are used for adjusting.





(c) Using a snap ring expander, remove the snap ring and magnet clutch rotor.
NOTICE: Do not damage the seal cover of the bearing when removing the snap ring.

(d) Disconnect the connector.





(e) Using a snap ring expander, remove the snap ring and magnet clutch starter.