Reassembly

LIGHTING: REAR COMBINATION LIGHT ASSEMBLY: REASSEMBLY

REAR COMBINATION LIGHT ASSEMBLY: REASSEMBLY
HINT:
- Use the same procedures for the RH side and LH side.
- The procedures listed below are for the LH side.

1. INSTALL REAR BUMPER SIDE BRACKET





(a) Engage the 4 claws and install the rear bumper side bracket.
2. INSTALL REAR COMBINATION LIGHT SOCKET AND WIRE SUB-ASSEMBLY





(a) Engage the 2 clamps and install the rear combination light socket and wire sub-assembly.
3. INSTALL REAR TURN SIGNAL LIGHT BULB
(a) Install the rear turn signal light bulb to the rear combination light socket and wire sub-assembly.





(b) Turn the rear turn signal light bulb and rear combination light socket and wire sub-assembly in the direction indicated by the arrow and install them as a unit.
4. INSTALL TAIL AND STOP LIGHT BULB
(a) Install the tail and stop light bulb to the rear combination light socket and wire sub-assembly.





(b) Turn the tail and stop light bulb and rear combination light socket and wire sub-assembly in the direction indicated by the arrow and install them as a unit.
5. INSTALL BACK-UP LIGHT BULB
(a) Install the back-up light bulb to the rear combination light socket and wire sub-assembly.





(b) Turn the back-up light bulb and rear combination light socket and wire sub-assembly in the direction indicated by the arrow and install them as a unit.
6. INSTALL REAR COMBINATION LIGHT BODY GASKET





(a) Install a new rear combination light body gasket.