Installation

U241E AUTOMATIC TRANSAXLE: SPEED SENSOR: INSTALLATION

INSTALLATION

1. INSTALL SPEED SENSOR NC
(a) Coat a new O-ring with ATF, and install it into the speed sensor NC.





(b) Install the speed sensor NC with the bolt.
Torque: 8.8 Nm (90 kgf-cm, 78 in-lbf)
(c) Connect the speed sensor NC connector.
2. INSTALL SPEED SENSOR NT
(a) Coat a new O-ring with ATF, and install it into the speed sensor NT.





(b) Install the speed sensor NT with the bolt.
Torque: 11 Nm (110 kgf-cm, 8 ft-lbf)
(c) Connect the speed sensor NT connector.
3. INSTALL AIR CLEANER CASE SUB-ASSEMBLY Installation
4. INSTALL AIR CLEANER FILTER ELEMENT SUB-ASSEMBLY Installation
5. INSTALL AIR CLEANER CAP SUB-ASSEMBLY Installation
6. INSTALL NO. 2 BATTERY CARRIER Installation
7. INSTALL BATTERY Installation
8. INSPECT FOR AUTOMATIC TRANSAXLE FLUID LEAK