Operation CHARM: Car repair manuals for everyone.
Home >> Scion >> 2009 >> xB L4-2.4L (2AZ-FE) >> Repair and Diagnosis >> Windows and Glass >> Windows >> Window Regulator >> Testing and Inspection >> On-Vehicle Inspection
Manuals through 2025 now available!

Our trusted friends have launched a new website named LEMON, which has newer manuals. It also contains all the CHARM manuals.

LEMON is the spiritual successor to CHARM, I recommend you try it!

Link: lemon-manuals.la or lemon-manuals.org.ua

(Some people have issue connecting. LEMON is investigating. For now, use Firefox or change your DNS server)

Or, hide this message: temporarily or permanently

On-Vehicle Inspection








WINDSHIELD / WINDOWGLASS: POWER WINDOW REGULATOR MOTOR: ON-VEHICLE INSPECTION

ON-VEHICLE INSPECTION

1. INSPECT FRONT POWER WINDOW REGULATOR MOTOR ASSEMBLY LH





(a) Inspect the operation of the PTC inside the power window regulator motor.
NOTICE: The work must be performed with the power window regulator and door glass installed on the vehicle.
(1) Connect an electrical tester DC 400 A probe to the wire harness of terminal 1.
NOTICE: Match the arrow mark on the probe with the direction of the current flow.
(2) Fully close the door glass by pressing the power window UP switch. Wait for approximately 60 seconds.
(3) Continue to press the power window UP switch and measure how long it takes for the electrical current to change from a range of 16 to 28 A to approximately 1 A (Inspection of current shut-off).
Standard:
4 to 90 seconds
(4) Check that the door glass moves downward when the power window DOWN switch is pressed.
If the result is not as specified, replace the power window regulator motor.
2. INSPECT FRONT POWER WINDOW REGULATOR MOTOR ASSEMBLY RH





(a) Inspect the operation of the PTC inside the power window regulator motor.
NOTICE: The work must be performed with the power window regulator and door glass installed on the vehicle.
(1) Connect an electrical tester DC 400 A probe to the wire harness of terminal 2.
NOTICE: Match the arrow mark on the probe with the direction of the current flow.
(2) Fully close the door glass by pressing the power window UP switch. Wait for approximately 60 seconds.
(3) Continue to press the power window UP switch and measure how long it takes for the electrical current to change from a range of 16 to 28 A to approximately 1 A (Inspection of current shut-off).
Standard:
4 to 90 seconds
(4) Check that the door glass moves downward when the power window DOWN switch is pressed.
If the result is not as specified, replace the power window regulator motor.
3. INSPECT REAR POWER WINDOW REGULATOR MOTOR ASSEMBLY LH





(a) Inspect the operation of the PTC inside the power window regulator motor.
NOTICE: The work must be performed with the power window regulator and door glass installed on the vehicle.
(1) Connect an electrical tester DC 400 A probe to the wire harness of terminal 1.
NOTICE: Match the arrow mark of the probe with the direction of the current flow.
(2) Fully close the door glass by pressing the power window UP switch. Wait for approximately 60 seconds.
(3) Continue to press the power window UP switch and measure how long it takes for the electrical current to change from a range of 16 to 28 A to approximately 1 A (Inspection of current shut-off).
Standard:
4 to 90 seconds
(4) Check that the door glass moves downward when the power window DOWN switch is pressed.
If the result is not as specified, replace the power window regulator motor.
4. INSPECT REAR POWER WINDOW REGULATOR MOTOR ASSEMBLY RH





(a) Inspect the operation of the PTC inside the power window regulator motor.
NOTICE: The work must be performed with the power window regulator and door glass installed on the vehicle.
(1) Connect an electrical tester DC 400 A probe to the wire harness of terminal 2.
NOTICE: Match the arrow mark of the probe with the direction of the current flow.
(2) Fully close the door glass by pressing the power window UP switch. Wait for approximately 60 seconds.
(3) Continue to press the power window UP switch and measure how long it takes for the electrical current to change from a range of 16 to 28 A to approximately 1 A (Inspection of current shut-off).
Standard:
4 to 90 seconds
(4) Check that the door glass moves downward when the power window DOWN switch is pressed.
If the result is not as specified, replace the power window regulator motor.
pro multis · About Operation CHARM