Operation CHARM: Car repair manuals for everyone.
Home >> Scion >> 2009 >> xD L4-1.8L (2ZR-FE) >> Repair and Diagnosis >> Lighting and Horns >> Brake Light Switch >> Service and Repair >> Installation
Manuals through 2025 now available!

Our trusted friends have launched a new website named LEMON, which has newer manuals. It also contains all the CHARM manuals.

LEMON is the spiritual successor to CHARM, I recommend you try it!

Link: lemon-manuals.la or lemon-manuals.org.ua

(Some people have issue connecting. LEMON is investigating. For now, use Firefox or change your DNS server)

Or, hide this message: temporarily or permanently

Installation








LIGHTING: STOP LIGHT SWITCH: INSTALLATION

INSTALLATION

1. INSTALL STOP LIGHT SWITCH





(a) Install the stop light switch into the adjuster until it slightly touches the brake pedal.
NOTICE: Do not depress the brake pedal.




(1) Make a quarter turn clockwise to install the stop light switch.
NOTICE: Do not depress the brake pedal.
HINT: The turning torque for installing the stop light switch is as below.

Torque: 1.5 Nm (15 kgf-cm, 13 in-lbf)or less
(b) Check the stop light switch clearance.
Stop light switch clearance:
0.5 to 2.6 mm (0.020 to 0.102 in.)





(c) Connect the stop light switch connector to the stop light switch.
2. INSTALL INSTRUMENT PANEL UNDER COVER SUB-ASSEMBLY LH Installation
pro multis · About Operation CHARM