Installation
TIRE AND WHEEL: TIRE PRESSURE WARNING ECU: INSTALLATION
1. INSTALL TIRE PRESSURE WARNING ECU
(a) Connect the connector to the tire pressure warning ECU.
(b) Install the tire pressure warning ECU with the nut.
Torque : 4.5 Nm (46 kgf-cm, 40 in-lbf)
2. INSTALL GLOVE COMPARTMENT DOOR ASSEMBLY Installation
3. CONNECT CABLE TO NEGATIVE BATTERY TERMINAL
HINT
When disconnecting the cable, some systems need to be initialized after the cable is reconnected Testing and Inspection.
4. REGISTER TRANSMITTER ID
HINT
Registration.
5. INSPECT TIRE PRESSURE WARNING SYSTEM
HINT
Test Mode Procedure.
6. INITIALIZE SYSTEM
NOTICE:
* Be sure to register the transmitter IDs of all tires including the full-size spare tire in the ECU before initialization.
* Be sure to inflate all tires including the full-size spare tire to the proper inflation pressure before initialization.
HINT
Initialization.