Operation CHARM: Car repair manuals for everyone.
Home >> Scion >> 2010 >> xD L4-1.8L (2ZR-FE) >> Repair and Diagnosis >> Heating and Air Conditioning >> Refrigerant Pressure Sensor / Switch >> Testing and Inspection
Manuals through 2025 now available!

Our trusted friends have launched a new website named LEMON, which has newer manuals. It also contains all the CHARM manuals.

LEMON is the spiritual successor to CHARM, I recommend you try it!

Link: lemon-manuals.la or lemon-manuals.org.ua

(Some people have issue connecting. LEMON is investigating. For now, use Firefox or change your DNS server)

Or, hide this message: temporarily or permanently

Refrigerant Pressure Sensor / Switch: Testing and Inspection





AIR CONDITIONING: AIR CONDITIONING PRESSURE SENSOR: ON-VEHICLE INSPECTION

1. INSPECT PRESSURE SENSOR

(a) Check the wire harness.





Text in Illustration:





(1) Disconnect the connector of the pressure sensor.

(2) Using an ohmmeter, measure the resistance of the wire harness side connector.

Standard resistance:





(3) Turn the ignition switch to ON.

(4) Measure the voltage of the wire harness side connector.

Standard voltage:





(b) Check the pressure sensor.





Text in Illustration:





(1) Set the manifold gauge.

(2) Connect the connector to the pressure sensor.

(3) Warm up the engine.

(4) Switch A/C ON.

(5) Using a voltmeter, measure the voltage between connector terminals 6 (PRE) and 11 (SG-1) of the air conditioner amplifier.

HINT
Check from the rear of the connector while it is connected to the air conditioning amplifier.

Standard voltage:





pro multis · About Operation CHARM