Operation CHARM: Car repair manuals for everyone.
Home >> Scion >> 2010 >> xD L4-1.8L (2ZR-FE) >> Repair and Diagnosis >> Powertrain Management >> Computers and Control Systems >> Oxygen Sensor >> Service and Repair >> Air Fuel Ratio Sensor >> Installation
Manuals through 2025 now available!

Our trusted friends have launched a new website named LEMON, which has newer manuals. It also contains all the CHARM manuals.

LEMON is the spiritual successor to CHARM, I recommend you try it!

Link: lemon-manuals.la or lemon-manuals.org.ua

(Some people have issue connecting. LEMON is investigating. For now, use Firefox or change your DNS server)

Or, hide this message: temporarily or permanently

Installation





2ZR-FE ENGINE CONTROL SYSTEM: AIR FUEL RATIO SENSOR: INSTALLATION

1. INSTALL AIR FUEL RATIO SENSOR

(a) Using SST, install the air fuel ratio sensor.

SST : 09224-00010

without SST - Torque : 44 Nm (449 kgf-cm, 33 ft-lbf)

with SST - Torque : 40 Nm (408 kgf-cm, 30 ft-lbf)

NOTICE:
* This torque value is effective when SST is parallel to the torque wrench.
* This torque value can be obtained by using a torque wrench with a fulcrum length of 300 mm (11.81 in.) and SST of 30 mm (1.18 in.) Service Precautions.
* Use a torque wrench with a fulcrum length of 300 mm (11.81 in.).





(b) Connect the air fuel ratio sensor connector and clamp.





2. INSTALL NO. 2 CYLINDER HEAD COVER Installation

3. INSTALL COWL TOP PANEL OUTER Installation

4. INSTALL FRONT AIR SHUTTER SEAL RH Installation

5. INSTALL WINDSHIELD WIPER MOTOR AND LINK Installation

6. INSTALL COWL TOP VENTILATOR LOUVER LH Installation

7. INSTALL COWL TOP VENTILATOR LOUVER RH Installation

8. INSTALL HOOD TO COWL TOP SEAL Installation

9. INSTALL FRONT WIPER ARM AND BLADE ASSEMBLY LH Installation

10. INSTALL FRONT WIPER ARM AND BLADE ASSEMBLY RH Installation

11. INSTALL FRONT WIPER ARM HEAD CAP Installation

12. INSPECT FOR EXHAUST GAS LEAK
pro multis · About Operation CHARM