Removal

BRAKE CONTROL / DYNAMIC CONTROL SYSTEMS: FRONT SPEED SENSOR: REMOVAL

1. REMOVE FRONT WHEEL

2. REMOVE FRONT WHEEL OPENING EXTENSION PAD Removal

3. REMOVE FENDER REAR PLATE MUDGUARD Removal

4. REMOVE FRONT FENDER SPLASH SHIELD SUB-ASSEMBLY Removal

5. SEPARATE WIRE HARNESS (for RH Side)

(a) Disengage the clamp from the No. 3 sensor clamp.





6. REMOVE FRONT SPEED SENSOR

(a) Disconnect the front speed sensor connector.





Text in Illustration





(b) Remove the nut and the No. 3 sensor clamp from the body.

(c) Remove the bolt C and separate the No. 2 sensor clamp from the shock absorber.

(d) Remove the bolt B and separate the brake flexible hose and No. 1 sensor clamp from the shock absorber.

(e) Remove the bolt A and the front speed sensor from the steering knuckle.

NOTICE:
* Prevent foreign matter from attaching to the sensor tip.
* Clean the installation hole and the surface for the front speed sensor every time the front speed sensor is removed.