Operation CHARM: Car repair manuals for everyone.
Home >> Scion >> 2012 >> iQ L4-1.3L (1NR-FE) >> Repair and Diagnosis >> Lighting and Horns >> Brake Light Switch >> Service and Repair >> Installation
Manuals through 2025 now available!

Our trusted friends have launched a new website named LEMON, which has newer manuals. It also contains all the CHARM manuals.

LEMON is the spiritual successor to CHARM, I recommend you try it!

Link: lemon-manuals.la or lemon-manuals.org.ua

(Some people have issue connecting. LEMON is investigating. For now, use Firefox or change your DNS server)

Or, hide this message: temporarily or permanently

Installation





LIGHTING (EXT): STOP LIGHT SWITCH: INSTALLATION

1. INSTALL STOP LIGHT SWITCH

(a) Install the stop light switch into the adjuster until it slightly touches the brake pedal.





Text in Illustration





HINT
Do not depress the brake pedal.

(1) Make a quarter turn clockwise to install the stop light switch.





Text in Illustration





HINT
* Do not depress the brake pedal.
* The turning torque for installing the stop light switch is as below.

Torque : 1.5 Nm (15 kgf-cm, 13 in-lbf) or less

(b) Check the stop light switch clearance.

Stop light switch clearance:

0.5 to 2.6 mm (0.020 to 0.102 in.)

(c) Connect the stop light switch connector to the stop light switch.

2. INSTALL LOWER INSTRUMENT PANEL ASSEMBLY Installation

3. INSTALL FRONT DOOR OPENING TRIM WEATHERSTRIP LH

4. INSTALL COWL SIDE TRIM BOARD LH

HINT
Use the same procedure as for the RH side Installation.

5. INSTALL FRONT DOOR SCUFF PLATE LH

HINT
Use the same procedure as for the RH side Installation.

pro multis · About Operation CHARM